Shop

Labino MidBeam 2.0 Hermes LED battery powered inspection lamp

$1,330.00

The MidBeam 2.0 Aerospace RRES 90061 generates an intensity of approximately 2 600 W/cm² (at 15 inches). While the remaining characteristics are the same as with MidBeam 2.0 Aerospace, theVisual s of this unit is specifically designed to meet the Rolls Royce engineering specification RRES 90061. The beam proFilme is very crucial for the Aerospace industry. This UV light is specially developed to offer a beam that is extremely homogenous – without any footprints showing from the LEDs, shades, dark spots or other disturbing defects in the beam.

The Labino MidBeam Aerospace is especially designed to meet the requirements of the Aerospace Industry. The differences between MidBeam Aerospace and the regular MidBeam light are as follows:
* Guaranteed intensity below 4 500 W/cm²
* No white light LED for after inspection
* Longer battery running time, more than 3 hours

MidBeam 2.0 is an extremely robust hand held lamp especially designed for use by heavy industries with very difficult operating environments.
Unique Features of MidBeam 2.0:
* IP68 Waterproof classification: Solids and liquids that often find their way into a light causing UV LEDs to burn cannot penetrate a MidBeam 2.0 unit.
* Battery indicator: Four colors, green, yellow, orange and red signal the user when the batteries are over 75%, 50-75%, 25-50% and below 25% charged respectively. With less than 10% left the red signal starts flashing.
* Operates while charging batteries: The battery version can operate like mains while charging the batteries via a connector at the back of the head.

MidBeam Aerospace is a handheld lamp, extremely compact in size, with a housing diameter of just 3.15 inches! MidBeam Aerospace is available as Battery or Mains. The mains operated model weighs just 702 grams (1.55 lbs) and the battery operated model weighs 781 grams (1.72 lbs). The light weight and compact size makes it extremely easy for the user to operate and carry around even the most difficult inspection areas and structures. This is made possible without compromising the performance of the lamp.

Each MidBeam Aerospace lamp consists of 4 LEDs offering a very even beam. The start button provides instant power. It is easy for the battery version to switch batteries. The location of the batteries (inside pistol handle) makes the ergonomics of the unit stable. Four batteries are provided and two are needed to operate. The design of the mains version makes it easy to support the light with a common stand on a bench.

The heat generated from the LEDs is managed via a mechanical cooling system – no fans necessary! MidBeam is 100% free from UV-B and the LEDs emit almost no visible light due to a visible light Filmter. It is compliant with ASTM UV-A intensity and wavelength specifications for FPI and MPI. IP65 approved for dust and water jetting proof.

LED: 4 UV-A (365 nm)
Light Beam: 2 600 W/cm² at 38 cm (15 inches) – The whole light beam is 150 mm (5.9 inches) , at a distance of 38 cm (15 inches)
Life time expect: 30 000 hrs (LED)
Battery running time: 3 hrs ( /- 5%)
Battery charging time: 8 hrs
Equipped with a current regulator which keeps the UV Intensity constant even though the battery fades

Country of origin – SE (Sweden)
Customs tariff – 85394900

SKU: MidBeam 2.0 Hermes Battery Category:

Description

Labino MidBeam 2.0 Aerospace RRES 90061 LED battery powered inspection lamp with (4) UV-A LEDs, (4) batteries, AC charger, 12V charger, PSU, UV blocking goggles, and plastic storage/carrying case

Additional information

Weight9 lbs
Dimensions14 × 13 × 7 in
Vendor

Labino